Get in Touch

Re-refined Spent Oil Products



Petroleum Solvents


TEST METHOD SPECIFICATION
ASTM IP P. Ether Mexol
60 / 80 80 / 110
Denisity   @15°C      g / ml 1298 160 0.66-0.69 0.69-0.72
Odoudr -- Acceptable
Distillation : 86 123 --
- I . B . P   °C      (Min) -- 55 72
Recovered @100°C    %vol    (Min) -- -- --
  Dry Point   °C       (Max) -- 80 115
Dustillation, Residue Acidity 1093 107 Neutral
Sulphur, Total  % mass  (Max) 1266 -- 0.01 0.01
Residue after evaporation
  mg/100ml      (Max)		 1353 -- 1 2
Copper Strip Corrosion
  (3 hrs @ 50 °C)       (Max)		 130 154 1 1
Color   (Saybolt)     (Min) 156 -- +25 +25
Doctor Test      (Max) 484 30 Negative Negative
Bromine No.      (Max) -- 129 1 3
Aromatics     % Vol      (Max) 1319 156 3 5

Turpentine


TEST METHOD SPECIFICATION
Denisity   @15°C      g / ml ASTM D - 1298 Report
Appearance Visual Clear & Bright
Flash Point     P.M.C.C     °C       ( Min ) ASTM D - 93 26
Copper Strip Corrosion      (2hrs. @100°C)     ( Max ) ASTM D - 130 1
Smoke Point   mm   ( Min ) ASTM D - 1322 28
Dustillation, Residue Acidity ASTM D - 86 --
Recoverd   @ 150   °C      %Vol      ( Max ) -- 10
Recoverd   @ 190 °C      %Vol      ( Min ) -- 80
End Point   °C -- Report
    Applications :
  •          Surface Coatings Industry.
  •          Thinner Industry.
  •          Paint Dilution.
  •          Dry Cleaning Processes.
  •          Polishes Industry.
  •          Rubber Industry.

Commercial Hexane ( Food Grade ) For Exportation (Sulfolane Treated)


TEST METHOD SPECIFICATION
ASTM - D IP 40/60
Denisity   @15 °C   g / ml 1298 160 0.670-0.680
Distillation : 86 123 --
I. B. P.   °C      ( Min ) -- 64
Dry Point   °C     ( Max ) -- 68
Distillation Residue Acidity       ( Max ) 1093 -- Neutral
Residue after Evaporation   mg / 100 ml     ( Max ) 1353 -- 0.5
Doctor Test 484 30 Negative
Copper Strip Corrosion   ( 3hrs. @50°C )   ( Max ) 130 419 DIV. 1
Saybolt Colour      ( Min ) 156 -- +30
Benzole     ppm   mass      ( Max ) 6730 -- 0.03
  Sulphur, Total     ppm   mass     ( Max ) UOP 357 5
U.V Absorbance   ( per cm )    Millimicron : 2008 -- --
@ 280 - 290 nm   Max -- 0.03 - 0.04
@ 290 - 299 nm   Max -- 0.02 - 0.03
@ 300 - 359 nm   Max -- 0.004 - 0.02
@ 360 - 400 nm   Max -- 0.004
   * For Guidance Only
    Applications :
  •          Surface Coatings Industry.
  •          Thinner Industry.
  •          Paint Dilution.
  •          Dry Cleaning Processes.
  •          Polishes Industry.
  •          Rubber Industry.

Special Hexane


TEST METHOD SPECIFICATION
ASTM - D IP
Denisity   @15 °C   g / ml 1298 160 0.670 - 0.680
Odour -- Acceptable
Distillation : 86 123 --
I. B. P.    °C    ( Min ) -- 60
Dry Point    °C    ( Max ) -- 67
Copper Strip Corrosion    ( 3hrs. @50°C )     ( Max ) 130 154 1
Saybolt Colour    ( Min ) 156 -- + 30
Doctor Test 484 30 Negative
Distillation, Residue Acidity     ( Max ) 1093 -- Neutral
Residue after Evaporation mg/100ml     ( Min ) 1353 -- 0.5
Benzole   ppm mass     ( Max ) 2600 -- 200
Sulphur, Total   ppm mass     ( Max ) 2622 -- 5
Sulfolane   ppm mass     ( Max ) Uop 660 5
U.V Absorbance   ( per cm )     Millimicron : 2008
@ 280 - 290 nm    Max -- 0.03 - 0.04
@ 290 - 299 nm    Max -- 0.02 - 0.03
@ 300 - 359 nm    Max -- 0.004 - 0.02
@ 360 - 400 nm    Max -- 0.004
   In case of special Hexan : The Cyclo Hexane % mass Max 0.195.
    Applications :
  •          Perfumes Industry .
  •          Chemical Intermediate .
  •          Pharmaceutical Products .

60/80 Solvent


TEST METHOD SPECIFICATION
ASTM - D IP
Denisity   @15 °C   g / ml 1298 160 0.66 - 0.69
Odour -- Acceptable
Distillation : 86 123 --
I. B. P.    °C      ( Min ) -- 55
Recovered   @100°C     %vol     ( Min ) -- --
Dry Point    °C    ( Max ) -- 80
Dustillation, Residue Acidity 1093 -- Neutral
Sulphur, Total   % mass      ( Max ) 2622 107 0.01
Copper Strip Corrosion   (3 hrs @ 50 °C) ( Max ) 130 154 1
Color    (Saybolt)     ( Min ) 159 -- +25
Doctor Test      ( Max ) 484 30 Negative
Bromine No.      ( Max ) - 129 1
Aromatics    % Vol       ( Max ) 6730 156 3
    Uses of 60 / 80 solvent :
  •          The manufacture of fast dring laqueres, roto groves inks, and other types of fast dring printing inks.
  •          It is an excellent solvent for the extraction of oils, perfumes, and fates.
  •          Rubber industry ( cements, tires and tubes ) .
  •          Textile printing and stains .

Mexol


TEST METHOD SPECIFICATION
ASTM - D IP
Denisity   @15 °C   g / ml 1298 160 0.66 - 0.69
Odour -- Acceptable
Distillation : 86 123 --
I. B. P.    °C      ( Min ) -- 72
Recovered   @100°C     %vol     ( Min ) -- --
Dry Point    °C     ( Max ) -- 155
Dustillation, Residue Acidity 1093 -- Neutral
Sulphur, Total    % mass      ( Max ) 2622 107 0.01
Residue after evaporation   mg/100ml     ( Max ) 1353 -- 11
Copper Strip Corrosion   (3 hrs @ 50 °C)    ( Max ) 130 154 1
Color    (Saybolt)     ( Min ) 156 -- +25
Doctor Test       ( Max ) 484 30 Negative
Bromine No.     ( Max ) -- 129 3
Aromatics    % Vol      ( Max ) 6730 156 5
    Uses of Mexol :
  •          Paints and varnishes applications.
  •          The thinner industry .
  •          Rubber industry.
  •          Cleaning Purposes.


Useful Links


  •   3 Al Max - Alexandria - Egypt
  •   +203 440 2832
         +203 440 2833
         +203 443 0123
  •   +203 443 0124
  •   chairman@alx-pc.com

Site Designed By Alexandria Petroleum Co., IT Deptartment.
IT@alx-pc.com